 |
4.1 Modular Adsorption Systems
|
CPL Carbon Link offer a standard range of modular filters for use in both the liquid and vapour phases. The CLEAN•FLO modular adsorbers provide a solution to the control of VOC emissions to atmosphere and prevent the discharge of dissolved organics at levels over permitted consents.
The modular design allows multiple units to be used in either parallel or series configuration to suit a variety of duties and the most rigorous levels of abatement required. The basic premise behind the CLEAN•FLO range is to provide a quick, simple and economical method of providing effective environmental protection. This is made possible due to the simplistic design allowing quick installation and operation. In addition to this, the units are free-standing and can be used in a variety of schemes including rental and on-site/off-site servicing plans. |
 CLEAN•FLO modular filter system |
|
The range consists of filter units designed to ensure effective and efficient cleaning of waste streams using the proven adsorptive properties of activated carbon.
Construction and design parameters are combined to result in optimum adsorption kinetics in the filter and practical dynamic and hydraulic characteristics ensure integration with other process plant is easily achieved. |
|
| CLEAN•FLO AT1 modular filter | CLEAN•FLO HY1 modular filter |
| CLEAN•FLO Modular Adsorption Systems | |||||
| System | Maximum Flow (Nm³/h) | Height (m) | Diameter (m) | Activated Carbon Charge (I) | Connections |
| Vapour Phase Systems | |||||
| CLEAN•FLO AT1 | 250 | 0.86 | 0.60 | 180 | 2" BSP female |
| CLEAN•FLO AT5 | 1000 | 1.53 | 1.40 | 900 | 6" ANSI 150 |
| CLEAN•FLO AT10 | 2000 | 1.76 | 1.47 | 1900 | 8" ANSI 150 |
| Liquid Phase Systems | |||||
| CLEAN•FLO HY1 | 1.1 | 0.93 | 0.58 | 190 | ¾" BSP male |
| CLEAN•FLO HY5 | 5.4 | 1.60 | 1.32 | 900 | 2" ANSI 150 |
| CLEAN•FLO HY10 | 12.0 | 2.12 | 1.50 | 2000 | 2" ANSI 150 |
| 
| 
| 
|